FrSky Receiver X6R with coaxial antenna

0 Review(s)

Stock: Out of stock


Including 21% VAT

NOTE: with normal coaxial antenna! Not with PCB antenna!

The FrSky X6R receiver is a Full Range 6 / 16 channels receiver. De X6R features 6 traditional PWM ports and a 16 channels SBUS port. The X6R comes with the new Smart Port and a traditional Analog Telemetry port (AD1) at the bottom of the receiver. This way the X6R can work with both the new Smart Port sensors and the traditional analog sensors. 

Smaller than the X8R, but still 16 channels over SBUS and Full Range (+/- 1.5km)! A great receiver to use in rc models with a flight controller.

Note: the FrSky X6R receiver must be flashed with the same firmware as your transmit module / transmitter. Our X6R receiver comes with the newest EU LBT firmware to comply with the European law. You can flash your transmitter or receiver yourself with your preferred firmware (EU or non-EU firmware).


  • With external analog telemetry port(AD1), When pins of A1 and X (Middle Pin) are connected by the jumper, A1 will change from External Analog Telemetry Port to Internal Built-in battery voltage sensor.
  • More number of channels: 1~6ch from conventional channel outputs, 1~16ch from SBUS port
  • With RSSI PWM output (0~3.3V) on board
  • Smart Port enabled, realizing two-way full duplex transmission.


  • Dimension: 47x23x14mm (L x W x H)
  • Weight: 16.7g Antenna: 150mm Coaxial Antenna
  • Number of Channels: 16CH (1~6ch from conventional channel outputs, 1~16ch from SBUS port)
  • With RSSI output on board: PWM voltage output (0~3.3V)
  • Operating Voltage Range: 4.0~10V
  • Operating Current: 100mA@5V
  • Operating Range: full range (>1.5km)
  • Firmware Upgradeable


  • FrSky DFT/DJT/DHT/DHT-U in D_mode
  • FrSky Taranis X9D/XJT in D8 mode
  • FrSky Taranis X9D/XJT in D16 mode 
  • All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode.
  • For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.

Note: The receiver comes with the newest EU LBT firmware to comply with the new EU guideline (ETSI EN 300 328 V1.8.1). The Taranis or XJT module must be flashed with the right firmware to work with this receiver. The other option is to flash the receiver with the right firmware. 

​Smart Port (S. Port) is a signal wire full duplex digital transmission interface developed by FrSky Electronic Co., Ltd. All products enabled with Smart Port (including XJT module, X6R and X8R receiver, new hub-less sensors, new Smart Dashboard, etc), serial port user data and other user input/output devices can be connected without limitations for numbers or sequences at a high transmission speed.

  • Model: FrSky_X6R
  • Shipping Weight: 45gr
  • Stock: Out of stock
  • EAN:
  • Manufactured by: FrSky

This product was added to our catalog on Monday 02 March, 2015.